-
Mastic attaching TECHNONICOL №27
Description of material:Mastic attaching TECHNONICOL №27 is a multicomponent homogeneous mass consisting of bitumen, mineral fiber, mineral filler, solvent, and technological additives. Application areas:Mastic attaching TECHNONICOL №27 intended for gluing slabs of extruded polystyrene to the bitumen, bitumen-polymer insulating materials, as well as to concrete, metal and wooden surfaces in the systems of base isolation. Coverage: when applying strips of 0.6-1 kg / m ², when applying 0.5-0.8 points kg / m ². When laying tiles on waterproofing layer having a protective layer of film that you want to remove it using a propane torch. Application temperature range from -10 to +40; below five stand in a warm place for at least 24 hours.Storage:Store in a dry, dark place at temperatures from -200С до +300С. Shelf life - 12 months. security measures: Do not use near sources of ignition. Work in a well ventilated area. Avoid contact with skin and...
View More
-
Technonicol polymer-bitumen sealant #42
Technonicol polymer-bitumen sealant #42Application areasApplication areas for TECHNONICOL polymer-bitumen sealant #42:– Hermetic sealing of insulation joints of concrete and asphalt coverings of airdromes and highways;– Sealing of cracks of concrete and asphalt coverings of airdromes and highwaysDescription of materialThe polymer-bitumen sealant is a hot-applied material consisting of oil bitmen, modified by synthetic rubber and technological additives. The material has a wide range of operating temperatures, high elasticity and dimensional stability. It is manufactured in three grades for use in various climatic zones: BP-G25, BP-G35, BP-G50.Method of applicationBefore application the sealant is warmed up to a working temperature of 160-190°С in boiler units designed for melting heating with constant mixing. The sealant surface coverage depends on a kind of performed work.StorageStore in a dry place protected against sunlight at a temperature between –20°C and +30°C. Guaranteed storage period — 12 months.Wide range of working temperaturesHigh elasticity Absence of shrinkageQuick selection of...
View More
-
Technonicol butyl rubber sealant #45
Technonicol butyl rubber sealant #45Application areasButyl rubber sealant is used to seal exterior surfaces, seams and joints of engineering structures of residential, public and industrial buildings and facilities. It comes in white and gray colors. This product is for professional use.Description of materialThe sealant is a homogeneous visco-elastic moving mass based on butyl rubber containing fi llers, target additives and organic solvent. After hardening TECHNONICOL butyl rubber sealant #45 is transformed into an elastic, water-air-tight mass that has high resistance to atmospheric influences (solar radiation, ozone, temperature extremes).Method of applicationBefore applying TECHNONICOL butyl rubber sealant #45 it is necessary to make sure that it is carefully mixed. Apply to the prepared surface using a trowel at an ambient temperature between -20°C to +40°C. When applying at subzero temperatures the sealant should be kept at room temperature for at least a day before application. The sealant surface coverage depends on a...
View More
-
Technonicol mastic for flexible shingles
Technonicol mastic for flexible shinglesTECHNONICOL mastic No 23 is a multicomponent material consisting of bitumen, butadiene-styrene termoplastic elastomer or its modifi cations, filler, solvent and technological additives.Advantages:Ready to use productHighly adhesive compoundEasy to use packagingWide range of adhesive applicationsApplication areas:TECHNONICOL mastic No 23 is designed for presizing the seams of flexible shingle and other bitumen materials and for adhesion of bitumen materials to brick, concrete, metal, wood, ceramic and other surfaces.Method of application:Clear the surface of dust, oils, ice-buildup and other contamination. Mastic application on a damp surface is not permitted. When applied to porous bases, the surface should first be prime-coated by using bitumen primer. Wait until the primer is fully dried. Carefully mix mastic before application! Distribute mastic using a putty knife on one of the surfaces in a layer 0.5–1 mm thick. Connect surfaces, avoiding the formation of folds and bubbles. It is recommended that special rollers...
View More
-
Bitumen hot roofing mastics MBK-G
Bitumen roofing hot mastics MBK-GApplication areasAdhesion of economy-class roll-fed bitumen materials, crack sealing, alignment of foundation defects up to 5 mm deep, and surface waterproofing.Description of materialMBK-G series mastics are an economy-class product. They consist of a mix of oxidized bitumen and mineral fillers. MBK-G mastics have suffi cient penetrability and have good water-repellent and adhesive properties. The mastic can be used in all climatic zones (as detemined in Construction Codes and Regulation (SNiP) 23-01).Method of applicationWarm up mastic to a temperature of 160-180°С with constant mixing and apply while still in a liquid state on a dust-free primer-coated base by a putty knife, small paint brush, or by pouring and leveling using special combs (spreading knifes). After cooling, a strong coating with good adhesion to the base is formed.StorageStore in a dry place protected against sunlight at a temperature between –20°C and +30°C.
View More
-
Technonicol hot roofing mastic
Technonicol hot roofing masticApplication areasTECHNONICOL hot roofing mastic #41 is designed for the installation and repair of roofs (when sealing cracks, hollows in cement/sand and asphalt underlayments, concrete plates; restoration of dressing compound of roof cladding; installation of roof drains; in places where roof cladding contacts pipes, caps; fi reless installation of roll-fed roofi ng materials) and waterproofi ngs (coating of steel structures, concrete blocks, columns that contact the ground, steel, concrete engineering structures, including pipelines).Description of materialTECHNONICOL hot roofing mastic #41 is produced from roofing bitumens, modified by polymers and mineral filler. Due to its similar structure the mastic is completely compatible with the roofing and waterproofing materials produced by the TechnoNICOL Corporation. Its application provides for the creation of a reliable, complete roofing system.Method of applicationThe mastic is warmed to a temperature of 160-180°С and is applied in a liquid state to the primer-coated base by a putty...
View More
-
COLD WATERPROOFING MASTIC n31
COLD WATERPROOFING MASTIC n31TECHNONICOL № 31 is a waterproofing material with enhanced elasticity, heat endurance and high heat resistance properties. TECHNONICOL № 31 is a water based material that does not contain solvents and is completely harmless making it ideally suitable for internal applications.Advantages:Ready to use (must be well stirred prior to application)Tough and highly elastic productSuitable for internal applicationsSolvent free, non flammableHarmlessTECHNONICOL No 31 emulsion application areas:Indoor waterproofing at bathrooms, pool floors, balconies, terraces and cellars.Mastic roof detailing or entire roof waterproofing, can be used in combination with glass fabric or roll fed materials.Protection of roofing layers, such as corrugated sheeting or failing flat roof waterproofing layers.Waterproofing of engineering structures (basements, footings, piles and other building elements buried under ground likely to be in contact with damp environment)Method of application:TECHNONICOL № 31 mastic should be applied to prepared surface clear of any debris and surplus materials, mastic can be...
View More
-
COLD WATERPROOFING MASTIC n24
COLD WATERPROOFING MASTIC n24TECHNONICOL № 24 mastic is a waterproofing solution combining elasticity, durability and economy. Material contains polymer additives, mineral fillers and solvents. Advantages:Ready to useCan be applied by persons without training or skillsSuitable for any types of waterproofing or repairsDurable and highly elastic productCan be used at temperatures below 0°CTECHNONICOL No 24 application areas:Waterproofing of concrete or wood surfaces.Protection of engineering structures (basements, piles and other elements of construction).Method of application:Mastic should be applied to prepared surfaces clear of any debris and surplus materials, by using stiff paint brush, filling knife or by pouring and leveling.Adhesion:With concrete - 0,1 МPаWith metal - 0,1 МPаFlexibility:-5 °СHeat resistance:+80 °СElongation:NOConsumption:For roof waterproofing 3,8-5,7 kg/m²Technology for roofing masticsPreparation:Before applying waterproofing is necessary to prepare the surface, apply primer and wait for it to dry.Reinforcement:Between the layers of the waterproofing is necessary to make fiberglass reinforcement, with glass, fiberglass or geotextile.Protection:The final waterproofing...
View More
-
COLD WATERPROOFING MASTIC n21
COLD WATERPROOFING MASTIC n21TECHNONICOL № 21 is a liquid rubber, ready to use material suitable for repair works or for waterproofing of entire roofs and details. Material consists of oil bitumen modified by artificial polymers, mineral fillers and organic solvent. After drying, material forms highly strong and elastic covering, highly resistant to temperature changes, considerably increasing the service life of the protected surfaces.Advantages:Ready to useTough and highly elastic productCan be used at temperatures below 0°CSignificantly prolongs service life of protected structuresTECHNONICOL No 21 application areas:Entire roof waterproofing including details and parapetsWaterproofing of engineering structures (basements, footings, piles and other building elements buried under ground likely to be in contact with damp environment)Weatherproofing and anti-corrosion treatment of metal surfaces including pipelines and car bodies.Method of application:TECHNONICOL № 21 mastic should be applied to prepared surface clear of any debris and surplus materials, mastic can be applied by using stiff paint brush,...
View More
-
Bituminous water base primer without any solvents
Bituminous water base primer without any solventsTECHNONICOL № 04 is a bituminous emulsion primer produced by bitumen dispersion method. The material does not contain solvents, has a neutral smell, hence is completely harmless and is suitable for internal weatherproofing applications.Advantages:Ready to use (must be well stirred prior to application)Suitable for internal applicationsSolvent free, non flammableCost efficient, easy to applyApplication areas:Primers are used to prepare substrate for application of torch-on, selfadhesive or other types of waterproofing materials. The prime coating is necessary to achieve strong adhesion of materials to porous, rough and dusty surfaces.Method of application:TECHNONICOL № 04 primer should be applied to prepared surface clear of any debris or sharp projections. The primer should be applied in continuous coat using roll or brush penetrating the surface and providing smooth and well adhered base for subsequent waterproofing layers. Apply at temperatures +5°C – +40°C, water can be added if necessary.Drying time:1...
View More
-
Bituminous primer with polymers
Bituminous primer with polymersCan be used for metal parts of bridge constructionMass fraction of solids25-30%Drying time10 minPackaging - 20 litres PreparationHow to work with Primer?Before applying the primer must be mixed with a mixer to obtain a homogeneous solution. Prepare the base and check the humidity.ApplicationThe primer is applied to the base with fur roller or brush. Consumption 250-350 ml / m².DryingPrimer drying time from 10 minutes, depending on ambient temperature and humidity.
View More
-
Classical ready-to-use bituminous primer
Classical ready-to-use bituminous primerPrimer № 01 is a solution containing high quality oil bitumen and specially selected organic solvents with softening temperature at no lower than 70°C. Primers are ready to use products for single coat applications suitable for all types of substrates.Advantages:Ready to use (must be well stirred prior to application)High penetrationCan be used at temperatures below 0°CQuick-dryingApplication areas:Primers are used to prepare substrate for application of torch-on, selfadhesive or other types of waterproofing materials. The prime coating is necessary to achieve strong adhesion of materials to porous, rough and dusty surfaces.Method of application:TECHNONICOL № 01 primer should be applied to prepared surface clear of any debris or sharp projections. The primer should be applied in continuous coat using roll or brush penetrating the surface and providing smooth and well adhered base for subsequent waterproofing layers.Drying time:12hPacking: 10 and 20 l
View More